Dali, Nanhai, Foshan Jincheng Hardware Machinery Factory, founded in 1986, is a professional design, manufacture non-ferrous metal and black metal pipe, rod, row, and wire production line equipment manufacturers, the main products are hydraulic sawing machine, straightening machine, pull drawing machine, chickened machines. Citation has been formed from rough casting, continuous casting and rolling, cutting, sawing, drawing, straightening, polishing until the finished series production line equipment, and according to customer's production requirements, design concepts for the customer design, manufacture, fit customer needs设备.
1. Using the FILE, scraper, chisel, flat shovel and other tools, can not be excessive force. Chisel, flat shovel with curling or crack, shall not be used, top of the oil must be promptly removed.
2. Use of hand hammer, sledgehammer, not allowed to wear gloves. Hammer handle, hammer it may not be an oil slick, playing a sledgehammer, the rejection can not turn the direction of someone.
3. Use hacksaw, the workpiece should be folders in prison, forced to be uniform. Work will be amputated, we should push up their hands or stand.
4. The use of loose wrench, pull port size should be consistent with the nut size, should not add the handle casing. Should be used to operate on high-altitude die wrench, such as the use of live wrench, the use of a rope tied to prison, people to wear seatbelts.
5. Use table vice, clamp the casing afterburner not use a hand hammer to fight, the clip piece shall not exceed two-thirds of jaw stroke.
6. In the same table on both sides of the hammer and shovel objects, in the middle should be set up protective net. Single workbench, to side against the wall.
7. Inspection equipment within the safety line to use lights or flashlights, disable fire. Pairs of top-heavy, easy to dump the equipment, we must pad stays firmly indeed.
8. Demolition equipment parts, should be placed firmly. Assembly is prohibited by hand This article from: Drawing Machine Net |
